The HYJ4C electric operating mechanism can be used for the closing and disconnection of the 252kV project of Shandong Electric Hitachi High Voltage Switchgear Co., Ltd. and the isolation switch, grounding switch and load switch with the required torque. Through the forward and reverse rotation function of the motor, this mechanism uses the transmission of mechanical clutch and worm gear to ensure the opening and closing position and output angle, and can fine-tune the output angle through the limiting screw of the clutch device. The mechanism has two operation modes at the same time: manual and electric.
1. The output angle of this mechanism is 36° (can be customized according to user requirements).
2. Output torque: 250N.m.
3. The rated voltage dividing and closing time ≤2S.
4. Use CSK type magnetic blow switch. The current that can be continuously passed through the contact is 10A at AC220V and 3A at DC220V.
5. Use the F10 type auxiliary switch. Normally, it is two 10 open and 10 closed auxiliary switches.
6. The secondary connector is an imported industrial connector, the protection level can reach IP68 level, and one mechanism is conventionally equipped with two 46-core industrial connectors.
There are several types of secondary industrial connectors, such as 24-pin, 32-pin, and 46-pin.
7. Technical parameters of energy storage motor
|
Model |
HDZ-28006 type |
|
Rated operating voltage |
AC and DC 220V |
|
Rated output power of the motor |
800W |
|
Normal operating voltage range |
85%-110% |
